AC&NC-Raid-Storage-JetStor-SATA-416iS

JetStor SATA 416iS
Native iSCSI RAID Array

File Server

Data Archiving

Disk-to-Disk Backup

Audio & Video Streaming

Digital Video Recording

Exclusive Advanced Data Sentry technology (RAID 6) provides the highest level of data protection. Multiple simultaneous drive failures can be tolerated without downtime or data loss.

On-line volume migration, snapshots, and N-way local mirroring - no system downtime.

iSCSI Jubmo frame support for best performance

Full 48-bit ATA addressing standard support allows for up to 144 petabytes capacity per drive to be utilized in the RAID array.

ASIC assisted parity for lightning-fast throughput.

RAID controller provides RAID 0, 0+1, 1, 3, 5, 6, 10, 30, 50 and RAID 60, Global Hot Spare Disk, Auto Rebuild, and up to 1GB of DDR ECC SDRAM-based data cache.

Intelligent SATA backplane design (uses no cables) allows "hot swapping" of disk canisters, power supplies, and fans for increased reliability, lower cost, and ease of maintenance.

Cache partitioning on a "per volume" basis.

Built-in management Ethernet port provides easy access to the web-based GUI RAID Manager for configuration, management, and monitoring functions. E-mail event notification is built-in. SSH and SNMP supported.

Host Access control per LUN (Read/Write & Read only).

Volume sharing with up to 16 host systems.

JetStor SATA 416S
JetStor SATA 412S
JetStor SATA 416F
JetStor SATA 408S
JetStor SATA 416FC4
JetStor SATA 416iS

Adding storage capacity is now as simple as plugging a cable into an available port on an Ethernet switch.Brand new JetStor SATA Model 416iS 16 bay RAID array delivers reliable data protection combined with the ease of use and compatibility advantage of iSCSI to support your organization storage requirements. No infrastructure upgrades are needed - iSCSI JetStor will provide block-level storage across your existing network. Engineered to meet stringent demands for continuous availability, JetStor SATA 416iS RAID array features powerful Intel Xscale 64-bit RISC processor for blazingly fast I/O operations, parity-assist ASIC, iSCSI-assist engine, TCP Offload Engine (TOE), completely cableless backplane-based design, and storage capacities reaching 12TB in one small 3U enclosure.

Low service and integration costs are assured by the JetStor's cableless design, three redundant hot-swappable power supplies with three independent power inputs, turbo cooling fans, and embedded RAID controller. Three year warranty comes standard with every array and covers all components.

The JetStor SATA 416iS RAID addresses many challenges present across a variety of businesses and delivers unparalleled storage flexibility, higher levels of data availability, management and configuration simplicity, all while securing maximum investment protection to support future growth.

Serial ATA drive capacities of 73GB (10,000 rpm), 150GB (10,000 rpm), 120GB (7,200 rpm), 160GB (7,200 rpm), 200GB (7,200 rpm), 250GB (7,200 rpm), 300GB (7,200 rpm), 400GB (7,200 rpm), 500GB (7,200 rpm), and 750GB (7,200 rpm) are available.

Full 48-bit ATA addressing standard support.

Maximum capacity 12TB when using 750GB drives.

RAID Architecture

64-bit RISC 400MHz CPU with 266MHz memory bus

Up to 1600 Mbytes/sec internal bandwidth

133 MHz PCI-X interface to the backplane

Host Connections

Two, Gigabit Ethernet using iSCSI protocol

Disk Bus Interface

Sixteen 3 Gb PHY Serial ATA Interface channels (SATA II); 48-bit addressing

iSCSI Controller

Silverback chipset; Dual Gigabit Ethernet
Independent access, failover, or load-balancing
802.3ad port trunking, LACP

Cache

Up to 1GB (using one, industry-standard DDR ECC SDRAM)

Operating Systems Supported

Windows Server 2003, Windows 2000 and MSCS (Microsoft Cluster Server), Windows NT, Sun/Solaris, Linux, MAC OS, and others to be announced

Temperature

50°F to 104°F operating, -40°F to +140°F non-operating 10°C to 40°C operating, -40°C to +60°C non-operating

Relative Humidity

10% to 85% non-condensing (operating), 5% to 90% non-condensing (non-operating)

Certifications

FCC, CE, TUV, and UL/CSA

Size/Weight

19" wide, 22" deep, 5.25" (3U) high; 40 lb. / 18 kg. (without disk drives)

I/O Connectors

Two RJ45 Ethernet iSCSI

Two 9-pin DB9 type RS-232 serial terminal port, UPS port

RJ45 Management Port / Ethernet

Power Required

110 or 220 VAC, ±20% @ 6 amps / 3 amps peak; 47 to 63 Hz. autosensing

Dual independent power inputs